Free Windows® Software - These programs greatly extend LP-100A capabilities
Remote control/monitoring | Automated plotting of SWR, complex impedance, RL, rho, Smith Chart | Automated antenna pattern plotting | Integration with TRX-Manager
________________________________________
The best just keeps getting better!
New in the '100A -
* Graphic VFD display with high contrast non-glare neutral density filter
* Optional green and blue filters
* Front panel power switch
* Large scrolling callsign screen saver
* Setup screen for call sign entry
* Setup screen for display brightness
* Setup screen for screen saver timers
* Dual 40MHz Processors
Features and specifications of the LP-100A, starting with exclusive features in RED...
* Per-band power calibration, user adjustable in 0.1% steps.
* Frequency counter - user adjustable per-band corrections of all parameters.
* Only meter with Z, R, |X|, Phase display... not affected by local broadcast stations as antenna analyzers can be.
* Super wide autoranging power range of 50 mW to 3000W, 160-6m... perfect for QRPp through QRO
* Optional couplers for 5KW and 10KW. Our 10KW will handle more power and generate much less heat than our competitor's.
* Only meter with Graphic VFD display. The graphic display allows for a solid bargraph with no gaps, and full screen scrolling screensaver as shown in the shot above with N8LP scrolling.
* Optional filters available for other display colors. Standard ND and optional blue and green shown below...
 | ||||
RedMan CB Stop
CB Radio Equipment & Supplies
www.RedManCB.com
RedMan CB Stop
CB Radio Equipment & Supplies
www.RedManCB.com
LP-100A Digital Vector Wattmeter by N8LP
Unbelieveable performance, sophisticated design, unheard of features. Simply the best!
Call 609-485-2485 OR CellPhone
609-705-6069
If you don't leave a message,
I can't call you back
All information on this page has been provided courtesy of the technician responsible for building these incredible units
| ||||||
Everything you need for critical station monitoring, tuning and protection on one screen. No other meter has dual bargraphs, OR a graphic display with solid bargraphs, OR bargraph with 90 bars for fine tuning of Power and SWR, OR an SWR alarm with snooze mode, OR a "sticky" bar for graphic peak hold indication... let alone having them all on one screen! Plus, the LP-100A has additional modes no other wattmeter has when you desire them... vector impedance, dBm/RL, calibrated field strength and compression ratio.
the LP-100A is in a class by itself.
* Only meter with simultaneous bargraphs for Power and SWR (or Power and Ref Pwr).
* Highest bargraph resolution. 90 segments gives 1% tuning resolution with standard bargraph range settings (adjustable)
* Only meter that has a "sticky" bar to graphically show peak hold point even while bargraph is moving.
* Fast attack bargraph will accurately display a single "dit" at over 100 wpm. Decay adjustable for Fast, Med, Slow.
* Active temperature compensation. Only other meter with this is Alpha.
* True 12-bit A/D converter gives <1W resolution at 2000W. 13.6 bit effective resolution up to 360W.
* Return Loss (RL) display of 0 to 49.9 dB with bargraph
* Separate scale for dBm measurements, +15.0 dBm to +64.0 dBm with bargraph
* Field Strength input covers the range of -15 dBm to +33 dBm (0.04 mW to 2W)... great for beam pattern and bench measurements
* Peak to Average ratio screen. Allows accurate checking and setting of compression in your speech processor.
* Support within TRX-Manager for direct remote monitoring
* Call sign screen saver - user programmable
* Free Plot program displays SWR, Z, Phase, R+jX (including sign), reflection coefficient, Return Loss and Smith chart.
* SWR alarm with "snooze" mode for antenna tuning. Alarm has LED, PTT relay and audible sounder (which can be easily disabled)
* G4HFQ's free PolarPlot program works with the LP-100A's Field Strength mode to provide automatic antenna pattern plotting. See software section of this web page.
Separate coupler with 50 ohm ports for uncluttered desktop - remotable up to 50' with appropriate calibration.
Three autotanging scales with independently adjustable maximums.
SWR display resolution is .01
SWR error < .15 (5%) from about 100mW to 3000W, <.05 typical
Power accuracy is better than 5% at any frequency from ~1W to maximum, 3% typical with NIST traceable factory calibration
Power display is actual power delivered to the load ( Fwd minus Ref power) or traditional Fwd power.
SWR Alarm system with set points for Off, 1.5, 2.0. 2.5, 3.0 and user setting. Audible & visual alarm, with PTT loop-thru & adjustable power threshold
Windows® freeware Virtual Control Panel for software control or remote control.
Built-in bootloader to allow for firmware upgrades to be downloaded and installed.
Conforms to FCC Part 15 A & B, ICAS and CE radiated emission limits, tested and verified by accredited lab
Couplers:
Standard coupler is LPC1, 3KW, 1.8 to 54 MHz. Optional couplers include...
LPC2 0.10W to 5KW, 1.8 to 30 MHz
LPC3 0.05W to 250W, 10 KHz to 54 MHz
LPC4 0.10W to 5KW, 1.8 to 54 MHz
LPC5 0.20W to 10KW, 1.8 to 30 MHz
LPC6 0.20W to 1KW, 100KHz to 20 MHz
All couplers rated for 100% duty cycle continuous carrier (CCS) operation at all frequencies except as follows...
LPC1, LPC2: 50% duty cycle on 160m for full power rating
LPC3: 125W CCS below 100 kHz
LPC4, LPC5: 50% duty cycle for full power rating
LPC6: 500W CCS below 500kHz
Pricing $ 435.00 with 3000 watt coupler
LP-100A Assembled & Calibrated: Includes standard LPC1 coupler (1.8 to54 MHz, 3KW), connecting cables between coupler and main unit, and power cable with tinned ends for connection to +12VDC.
Basic setup and operation, along with full Setup menus and explanations of each. The LP-100 is highly customizable with 15 menus and over 70 choices.
- Fwd & Net Power - 50mW to 3KW Autoranging
- SWR, R+j|X|, Reflected Power
- 1.8-54 MHz with frequency counter
for per-band corrections of all parameters
- High resolution Graphic VFD display
- dBm/RL scales with 0.1 dB steps
- Calibrated field strength input (-15 to +33dBm)
- Screen for measuring speech compression
- SWR alarm w/PTT disable & snooze button
- Serial port w/Windows® control & plotting software
- 5KW & 10KW options
- Flash upgradeable
THEY ARE HERE
All I can say is WOW !!!
All The above technological Mumbo jumbo,
and the darn thing is Plug and Play technology.
I had it up and running my way in less then 15 minutes
March 25,2009 In Stock !!!
Available with 5kw coupler and 10kw $ 510.00
Accurate ??? pictured below is the lp100a and a Bird with 5000w slug.
Dead on accurate , and a whole lot easier to read !
Check out Does Not require a paypal account.
You can use your credit or debit card.
